|
|
|
|
| AMERICAN RECORDER CO-2 CO2 Dust and Particle Remover |
- A high velocity, residue free stream of gas, perfect for cleaning cameras, camcorders, electronics,
- Additionally, carbon dioxide gas will not break down delicate lubricants, inks and dyes.
- The CO2 is made in the USA from high strength, glass filled nylon. All internal fittings are brass a
- The CO2's body features six safety vents that allow gas to escape if the unit were opened before gas
|
|
|
New From: $18.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dynex MiniDV Head Cleaner |
- For use with MiniDV camcorders
- Full-path, dry head cleaner
- Cleans in approximately 10 seconds
- Lasts for approximately 40 cleaning cycles
- Improves picture and sound quality
|
|
|
New From: $1.99 Used From: $0.89
|
|
|
|
|
|
|
|
| Visible Dust Pro 1.3x Sensor Brush Kit (2 Sensor Brushes) |
- This kit is recommended for the following cameras: Canon 1D Mark II. Kodak DCS-760. D2x, D50 & D70s (Can use either 1.6x or 1.3x)
- Friction Resistant - using the proper technique during processing one can change the friction resistance of the brush fibers. Therefore determining how much residue is left on the sensor by various polymers. Neither of these processes will change the appearance of the brush.
- Curing - Is done to prevent the residual stain left behind with most polymers. This is achieved using high-temperature baking and/or chemical and radiation techniques.
- Fiber Thickness - Sensor Brush is made of the thinnest possible fibers. They are quite resilient in texture and several times thinner than a human hair and are 30-40% thinner than most consumer fibers.
- Flow thru - Sensor Brush is designed to have the optimal fiber density concentration allowing the dust crystals to pass through without resistance.
|
|
|
New From: $69.00
|
|
|
|
|
|
|
|
| Visible Dust Full Size Pro 1.0x Complete Kit Bundle, Digital Sensor Cleaning Package |
- Full Size Pro 1.0F Kit: A New design 24mm Sensor Brush and a 24mm SBF brush.
- The Sensor Clean & Chamber Clean Combo keeps the Internal Parts Clean.
- The orange adapter is for the 24mm SBF fan brush. Simply remove the Yellow adapter and replace with this one to clean and recharge the SBF brush.
- The 8mm Sensor Brush is used for Touch-ups & Cleaning the Edges Around the Chamber. Extra Adapter (white) for your 8mm Brush is Supplied.
- Smear Away Kit: Use this kit to remove the toughest stains and smears from sensors that are not removeable by other solutions such as alcohol. These tough spots include chambercoating film, electronic wax, mechanical oil, and saliva drops.
|
|
|
New From: $249.95
|
|
|
|
|
|
|
|
More Info 
